5V 2.4A safety hammer dual USB car charger with LED

Model Number: ZHENJI_2016-07-1502 Brand Name: ZHENJI Key Specifications/Special Features: A, product parameters1. The DC input voltage range: 4V - 36V (maximum pressure 42V)2. The output voltage: DC5V + / - 0.25V3. The output current: DC2400/3100 ma, + 5)4. Ripple: 200 MVP - p or less (any under normal working load test conditions: use an oscilloscope to 20MHz bandwidth connection, to the output of the charger, and outputs a 0.1 uF ceramics capacitors in parallel and a 10uF electrolytic capacitor.)5. Work efficiency: under the condition of rated input voltage and rated load, work efficiency of 87% or higher.Second, the other informationColor: silver/gold/black/grey/red/green/bluePacking: neutral packing, the quotation does not include packaging, packaging can be customizedThree, product features
1. Safety hammer car charger for all kinds of mobile phones, MP3, MP4, camera, iPod iphone 3 g 4 g device, Samsung Galaxy Tab, etc series products.
2. The safety hammer car charger output provide two different outlets, a rechargeable two kinds of electronic products, charging fast and convenient.
3. Safety hammer car charger with the input reverse, thermal multiple protection, over current, short circuit and automatic restart function, make the products more safe, allowing you to use more at ease, rest assured.

Fourth, using method
1. Safety hammer car charger is equipped with two different current output, choose different devices to use.
2. The safety hammer car charger USB plug into car cigarette lighter.
3. Safety hammer car charger USB end connected to the car charger output end, and then group the corresponding plug connected to the power equipment (such as mobile phones, MP3, camera series, etc.) for power supply or charge.
4. After a full charge please pull out car charger from the car cigarette lighter.

Five, the matters needing attention
1. Please insert the car again after a car charger.
2. Please pull out the car charger or car stalled after use.
3. Do not use the safety hammer car charger in electronic products, outside the over charging specification recommended by the charging of the specifications of the products within 1 a for normal use, in order to avoid because of specifications of any problem.
4. Safety hammer car charger will be fever, in use process in normal room temperature, fever is a normal phenomenon less than 60 degrees Celsius.
5. When aluminum alloy car charger after the over current, over temperature, short circuit, protect circuit can make the car charger to stop working, pull out the equipment after the car charger automatic recovery), you need to check whether the device is in conformity with car charger parameters.